Schluter DITRA Matting De-coupling and Waterproofing Membrane (Per Sq Metre)
Product #:SHDITRA1M
CALL US
or
Get A Quote
Delivery Time: 1 - 2 day delivery
Delivery: FREE on orders over £50!*
Product Details
Schluter DITRA Matting As an authorised national distributor for the FULL Schluter range of products, we are confident that we can offer the best advice and prices. Our fully trained staff can get technical information, manufacturer support and most of all, the best possible prices for the complete range including DITRA matting. For prices and availability on this, and any other Schluter product please call: 0845 050 93 83, alternatively if you need to purchase a de-coupling membrane now, then our Genesis GMat will meet your technical requirements.
Schluter DITRA comes as a 1m width roll that is cut to the length you require.
Schluter DITRA Matting is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration, and an anchoring fleece laminated to its underside. Designed for tile and natural stone installations, Schlüter®-DITRA serves as a waterproofing membrane, a vapour pressure equalisation layer to accommodate moisture occurring at the underside of the substrate, and an uncoupling layer for problematic substrates.
The substrate must be even and load bearing. To bond Schlüter®-DITRA, use a bonding adhesive that is appropriate for the substrate. Apply the adhesive using a 3 x 3 mm or 4 x 4 mm notched trowel. The anchoring fleece on the underside of Schlüter®-DITRA must be fully engaged in the adhesive to provide a mechanical bond to the substrate. Please observe the open time of the bonding adhesive.
Download full product information sheet
Schluter DITRA comes as a 1m width roll that is cut to the length you require.
Schluter DITRA Matting is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration, and an anchoring fleece laminated to its underside. Designed for tile and natural stone installations, Schlüter®-DITRA serves as a waterproofing membrane, a vapour pressure equalisation layer to accommodate moisture occurring at the underside of the substrate, and an uncoupling layer for problematic substrates.
The substrate must be even and load bearing. To bond Schlüter®-DITRA, use a bonding adhesive that is appropriate for the substrate. Apply the adhesive using a 3 x 3 mm or 4 x 4 mm notched trowel. The anchoring fleece on the underside of Schlüter®-DITRA must be fully engaged in the adhesive to provide a mechanical bond to the substrate. Please observe the open time of the bonding adhesive.
Download full product information sheet
Use the form below to email a friend about this product.
