LTP Mattstone H2O (5 Litre)

LTP Mattstone H2O is a natural matt-finish impregnating floor sealer, which provides effective resistance to staining with minimal change to the treated surface. Mattstone H2O is environmentally safer, water-based, low odour, suitable for all types of natural stone and has long lasting protection.

Key Features

• Protects against staining; repels water, oil and grease

• Provides a natural, matt finish and enhances the colour and texture of the tile

• Allows the surface to breathe

• Suitable for use on travertine, stone, sandstone, slate, marble, terracotta, quarry, brick and paving

• Suitable for internal and external use

• Coverage:
  Low porosity floors; approx. 1-2 litres per 10m² of floor
  High porosity floors; approx. 3-4 litres per 10m² of floor

Instructions for use

Always test the solution on an inconspicuous area before general application.

• Clean the surface to be treated and allow to fully dry. This will ensure the surface is completely clean, dry and free from dirt, grime, cement and grout

• Shake the bottle prior to use

• Apply LTP Mattstone H2O with a soft cloth or brush allowing at least two hours between coats - do NOT apply in direct sunlight
  Note. more absorbent floors may require further coats and on such floors the product should be generously applied

• One hour after the final coat has been applied, rub the surface with a soft fluff-free cloth or buffing machine to obtain a uniform finish and remove any material not yet absorbed
  Note. this product will dry after about two hours, but will take a further three days to become fully resistant

The aim is to completely fill the substrate with sealer without over applying it. The sealer will help to inhibit staining but such spillages should still be wiped up immediately.