Great news – BAL Flexbone 2Easy and Flexbone VAried are now in stock at Tile Fix Direct! We’re excited to be able to offer you these two exciting new uncoupling products that will save you time and money on your next floor tiling job. BAL now offer a complete uncoupling package of solutions and say “Each and every project has different requirements. Maybe height build-up is an issue, perhaps time is an issue, or the substrate is particularly troublesome. Cavities or no cavities, lightweight or floating, water- proof or not – we have the uncoupling solution for you!”
Flexbone 2Easy is a unique uncoupling matting that requires no adhesive between the mat and the substrate. That’s right, as long as your floor is level and stable you can simply give it a quick sweep, roll out the matting and start tiling. Flexbone 2Easy is 3mm thick and has a bone-shaped structure that’s much easier to fill with adheisve than other cavity-style decoupling mats. Because there’s no adhesive beneath the matting it can be used in places where tiling was not an option before; for example rental properties, heritage projects or showrooms where the flooring might need to be changed frequently. You can even use it over new anhydrite or sand & cement screeds that are not cured as the moisture will evaporate through covering joints. The matting comes on a 20m roll but you can also buy it in 5m cut lengths.
Flexbone VAried is a bonded uncoupling mat but with the same bone-shaped structure as 2Easy that’s easy to fill and reduces installation time by up to 30%. This matting is perfect for floors subject to lateral movement; it stops tiles cracking or popping up and has 50% higher shear strength than other cavity mats. It’s also waterproof so it’s the ideal choice for wet rooms, showers and bathrooms as no additional tanking is required. Flexbone VAried is recommended for underfloor heating, new cement screeds, timber floors and existing floor surfaces and can be used to install large format ceramic & porcelain tiles, slabs & natural stone with a minimum edge length of 100mm. As well as domestic environments, it is perfect for high load bearing commercial projects such as shopping malls, airports, car showrooms, office buildings and hospitals.