BAL Flexbone Varied Matting (Per SQ M, Rolls, or Pallet)

BAL Flexbone Varied uncoupling matting is a high load-bearing and waterproof membrane that accommodates lateral movement. The unique bone structure of the matting means that less adhesive is needed and installation is 30% faster - saving you time and money. It can be used on floors internally and in wet environments like wet rooms and walk-in showers with no additional tanking. The matting also features patented GripLock technology for the best adhesive shear strength (50% better than other cavity mats) which provides for higher levels of lateral movement.

Now available to order by the square metre, by roll, or by pallet!

• Decoupling for lateral movement on floors
• Fast track installation - easy fill cavities & start tiling immediately
• 50% higher adhesive shear strength than other cavity based uncoupling mats
• Excellent tensile strength stops tiles popping up or cracking
• Fleece layer compensates for water vapour pressure
• Waterproof so can be used in wet areas without additional tanking
• Can be stored for up to 24 months in dry rooms, away from direct sunlight

As well as domestic environments, it is perfect for high load bearing commercial projects such as shopping malls, airports, car showrooms, office buildings and hospitals. It can be used with large format ceramic & porcelain tiles, slabs & natural stone with a minimum edge length of 100mm. Flexbone VAried is recommended for underfloor heating, new cement screeds, timber floors and existing floor surfaces.

Please note that BAL Flexbone VAried is not suitable for exterior environments, substrates with vertical movement, parquet flooring or to bridge movement joints.

BAL Flexbone VAried is 1m wide, 3mm thick and each 20m roll weighs approximately 18kg. It is available in 5m cut lengths.