Dural Durabase CI-FH Decoupling & UFH Matting

Dural Durabase CI-FH is a decoupling matting that doubles as a carrier for electric underfloor heating cables. This saves you time and money as there is no need to lay uncoupling matting and additional underfloor heating mats. The matting is available in rolls of 15m and is 1m wide.

Once the matting is installed and the adhesive has cured, you can install the cables using the 'studs' in the matting to hold them in place. These studs also work as a measuring tool, keeping cables the correct distance apart.

Cables should be installed at 75mm for general room heating. When used with 2mm cable it is advisable to incorporate a 3 stud locking loop every 30cm. Plan your cable layout carefully before beginning to ensure there is no cross over of cables, and the positioning of sensors and power supplies is suitable.

Features & Benefits of CI-FH Matting

• Combines decoupling and underfloor heating in one handy product.
• The universal carrier matting can be used with all electric underfloor heating cables from 2mm-5.5mm.
• Only install cables where you need them in the room.
• Install electric underfloor heating cables quickly and easily using the studs in the matting.
• The matting protects cables from trowel work while embedding in adhesive or levelling compound.
• Use with your preferred underfloor heating cable to save on costs.
• Low height matting is just 5mm thick.

Dural Durabase CI-FH is sold per m2 so you never end up buying more than you need for your project. Read the underfloor heating cable manufacturers instructions carefully before installation. Installed thickness depends on heating cables used. Suitable for internal use only.