Schluter DITRA HEAT E HK Underfloor Heating Cable

(No reviews yet) Write a Review
  • Unilateral connection for Ditra Heat Matting & Ditra Heat DUO Matting
  • Rated at 136 W/m² (spacing: every third stud ≙ 9 cm)
  • Seamless cold warm transition without shrink technology
  • Easy to install loose lay heating cables
  • 230 Volt nominal voltage
69.6 58
£69.60 Inc. VAT
£58.00 Ex. VAT

In Stock

Adding to basket... The item has been added
COVERAGE CALCULATOR
Bulk Discount

The Schluter DITRA HEAT E HK Cable is an electrical under tile heating cable with a unilateral connection for installation in the Schluter DITRA HEAT Matting and DITRA HEAT DUO uncoupling matting. The Schluter DITRA HEAT E HK Cable is available in 17 different lengths for single zones. Note: these cables must not be shortened. When selecting the heating cable for your application, please note that the table below with the heated space in m² does not specify the room size. To determine the heated space, deduct unheated zones such as perimeter areas and storage space from the room size.

The Schluter DITRA HEAT E HK Cable can be installed in the matting on both walls and floors. It is recommended to set the spacing of the cable at 3 studs apart in the matting for floors, this gives a heat output of 136 W/m². For walls, the cables can be set at 2 studs apart – this gives a heat output of 200 W/m². The Schluter DITRA HEAT E HK Cable is easily installed in the matting by using an old grout float to press the cable down in between the studs. Please see the table below to see how much cable you need.

Code Metres Heated Floor (136W/m2) Heated Floor (200W/m2)** Watts Resistance (Ohm)*
SHDHEHK4 4.00 0.40 0.25 50 1058.00
SHDHEHK6 6.76 0.60 0.43 85 626.00
SHDHEHK12 12.07 1.10 0.70 150 352.67
SHDHEHK17 17.66 1.60 1.00 225 235.11
SHDHEHK23 23.77 2.20 1.50 300 176.33
SHDHEHK29 29.87 2.70 1.80 375 141.07
SHDHEHK35 35.97 3.30 2.20 450 117.56
SHDHEHK41 41.56 3.80 2.60 525 100.76
SHDHEHK47 47.67 4.40 2.90 600 88.17
SHDHEHK53 53.77 5.00 3.30 675 78.37
SHDHEHK59 59.87 5.50 3.70 750 70.53
SHDHEHK71 71.57 6.60 4.40 900 58.78
SHDHEHK83 83.77 7.70 5.10 1050 50.28
SHDHEHK95 95.47 8.80 5.90 1200 44.08
SHDHEHK107 107.67 10.00 6.60 1350 39.19
SHDHEHK136 136.16 12.70 8.40 1700 31.12
SHDHEHK164 164.07 15.00 10.00 2050 25.80
SHDHEHK192 192.27 17.70 11.80 2400 22.04
SHDHEHK216 216.27 20.00 13.20 2700 19.59

*Resistance tolerance -5% / +10% **Permissible in wall areas only

Features and Benefits of Schluter Ditra Heat E HK Cables

  • Unilateral connection for Ditra Heat Matting & Ditra Heat DUO Matting
  • 17 Different cable sizes for all manner of rooms
  • 230 Volt nominal voltage
  • Rated at 136 W/m² (spacing: every third stud ≙ 9 cm)
  • Rated at 200 W/m² (spacing: every second stud ≙ 6 cm)
  • Seamless cold warm transition without shrink technology
  • Fluoroplastic insulation
  • Easy to install loose lay heating cables
   

Delivery times are Monday - Friday (excluding Bank Holidays) from 7:30am - 6:00pm. Most deliveries leave on Express Delivery for 1 - 3 working day delivery service. A 'working day' is Monday to Friday, excluding bank holidays. Weekends and bank holidays do not count as working days.

FREE 1-3 working day delivery service for all orders over £375 (excluding VAT). See our Delivery Page for further details.

Long Length Items like tile trims will incur a £9.99 delivery surcharge in line with our couriers. This surcharge is automatically added onto your order at the checkout stage.

Special 1 - 2 Day Shipping occurs when an item is sent to you direct from the manufacturer, usually on a next day service. This usually incurs a flat rate shipping charge of £15.99.

Click and Collect

We offer a free Click and Collect service on all stocked items at our main warehouse. Click and Collect orders are available for collection from 08:30am to 16:00pm Monday to Friday. Please allow 2 hours from your order to when you come and collect. Please wait for and bring your order confirmation paperwork with you. Collection address is Tile Fix Direct, Unit 1 Hollybush Lane, Ash Vale, GU11 2PX.

Delivery Damages

It's important that you indicate the damages on the delivery note when you sign for the goods. Notify Tile Fix Direct by emailing us or calling our advice line on 0333 320 04 24 if there are any damages or irregularities to your order within 24 hours of delivery.

No reviews have been written yet, be the first. Write a Review
Delivery

Delivery times are Monday - Friday (excluding Bank Holidays) from 7:30am - 6:00pm. Most deliveries leave on Express Delivery for 1 - 3 working day delivery service. A 'working day' is Monday to Friday, excluding bank holidays. Weekends and bank holidays do not count as working days.

FREE 1-3 working day delivery service for all orders over £375 (excluding VAT). See our Delivery Page for further details.

Long Length Items like tile trims will incur a £9.99 delivery surcharge in line with our couriers. This surcharge is automatically added onto your order at the checkout stage.

Special 1 - 2 Day Shipping occurs when an item is sent to you direct from the manufacturer, usually on a next day service. This usually incurs a flat rate shipping charge of £15.99.

Click and Collect

We offer a free Click and Collect service on all stocked items at our main warehouse. Click and Collect orders are available for collection from 08:30am to 16:00pm Monday to Friday. Please allow 2 hours from your order to when you come and collect. Please wait for and bring your order confirmation paperwork with you. Collection address is Tile Fix Direct, Unit 1 Hollybush Lane, Ash Vale, GU11 2PX.

Delivery Damages

It's important that you indicate the damages on the delivery note when you sign for the goods. Notify Tile Fix Direct by emailing us or calling our advice line on 0333 320 04 24 if there are any damages or irregularities to your order within 24 hours of delivery.

Frequently asked questions about Schluter Ditra Heat Underfloor Heating Kits

What is the minimum cover over the cable?

The minimum combined adhesive and tile covering must be at least 5 mm. The maximum adhesive bed depth should not exceed 10mm.

Can I cut the heating cable down?

Only the cold leg of the heating cable can be trimmed down, the hot leg of the cable cannot be trimmed or cut in any way, so it’s essential to select the correct cable length for the heated area.

What wattage does the system run at on timber and concrete?

The system is designed at 136 w/m².

How many cables can be attached to a thermostat?

Each Schluter Ditra thermostat can have 2 cables per stat to a maximum loading of 3600w (16 amps) or 2300w (10 amps)

Do I have to put thermal insulation boards down first?

You definitely don't have to, but for more efficient heating we recommend a rigid insulation layer below the kit to create a thermal barrier.

How far away from the wall should I place the cable?

It is recommended that the cable is positioned at least 2 studs (60 mm) away from walls or any building element e.g. wall, column, bath, toilet etc.

How far apart should the cables be placed?

The system has been designed for the cables to be positioned at 3 studs apart to ensure a uniform temperature and optimum performance.

How hot does the Ditra Heat cable get?

The thermostat allows the cable to heat up to 84 degrees.

69.6 58
£69.60 Inc. VAT
£58.00 Ex. VAT

In Stock

Adding to basket... The item has been added
COVERAGE CALCULATOR
Bulk Discount
No reviews have been written yet, be the first. Write a Review

You May Also Like

The Schluter Ditra Heat E RT3 Thermostat supplied by Tile fix Direct
Schluter Underfloor Heating Kit
Another view of the Schluter DITRA-HEAT-DUO with WIFI Underfloor Heating Kits supplied by Tile Fix Direct
A roll of Schluter Ditra-Heat Duo Matting supplied by Tile Fix Direct
A roll of Schluter Ditra Heat Duo PS self adhesive matting at TIle Fix Direct